KR Series
K 68RP / K 72RP / K 78RP

- Complied with two hydraulic pumps. One for the hydrostatic steering and one for the rest of the hydraulics which means there is sufficient pressure in the line for all functions ensuring safer, controlled steering and smooth, powerful bucket operation.
- Conveniently placed controls are all within comfortable reach and color coding makes operation safe and easy.
- Ride more comfortably over tough terrain with an adjustable ergonomic suspension seat.
- Gas strut one piece pop up bonnet allows easy access to all regular maintenance points such as engine oil and filters for air, fuel and hydraulics, etc.
- Exclusively designed Power Transmission offers better fuel efficiency and performance on Branson K Series tractors.
- Climate controlled and well structured cab fully protects operators from dust and harsh weather conditions.
- With a strong rear hitch lift capacity of 1,733kg Standard CAT II 3point Hitch allows Operators up to heavier implements.
- 3 speed independent PTO is standard equipment which allows operator to switch to approx 540 / 750 / 1,000rpm to operate implements more efficiently and also with greater fuel efficiency.
- There are front and rear wind screen washers / wipers and the rear window pivots open horizontally both side windows can be cocked open slightly too.
There are no related videos.

Powered by an efficient powerful genuine Branson engine for longer life and improved heat dissipation.
A powerful turbo-diesel 4 cylinder engine under the rear-hinged red bonnet : in keeping with Branson's habit of using good components, the 3.4-litre Branson engine wears a Garret turbo and delivers 78hp at 2,500 RPM.
Putting the power onto the dirt is simple to use synchro power shuttle, driving all four wheels.
-
- Foldable ROPS
- 3 Speed PTO
- Flat step through deck
- New bonnet design for better heat dissipation

Provides more strength to enhance rear work.

Power shuttle lever enables easy shifting between forward and reverse.

Electro - hydrauliccontrolsare ergonomically designed for convenient operation.

3PL lift arm control buttons are positioned on the rear fender and LED rear light is installed.
Models |
Series |
K Open station series |
---|---|---|
Trade Names |
K78R |
|
Engine HP (kW) @ Rated RPM |
78 (58.1) @ 2500 |
|
PTO HP @ Rated RPM |
60 |
|
Drive System |
4 Wheel Drive |
|
Max.Forward Speed (Km@RPM) |
39.85 @ 3050 |
|
Min.Forward Speed (Km@RPM) |
0.95 @ 3050 |
|
Engine |
Make |
D3400T |
Type |
Vertical 4 Cycle, Water Cooled, Diesel |
|
Displacement (cc) |
3409 |
|
Aspiration |
Turbocharged |
|
Combustion System |
Direct Injection |
|
Air Cleaner |
Dry, Element |
|
Transmission |
Main Shift |
SynchroMesh (Declutch Lever) |
Reverse Method |
PowerReverser (Electro-Hydraulic) |
|
Gear Shift |
16F/16R (Creep) |
|
On-the-Go Shifting (Yes/ No/ Partial) |
Yes (Shuttle) |
|
Clutch |
Wet, Multi Plate (Forward/Reverse Plates: 6/ 6 EA) |
|
Brake |
Wet, Multidisc |
|
Fuel System |
Ground Level Fuel Tank (L) |
90 |
PTO |
Standard |
Rear PTO: 540 / 750 / 1000 RPM (Independent Type, CW, 6 Spline shaft) Front PTO: Attachable |
Hydraulics |
Main (lpm) |
45 |
Steering lpm(L/min) |
30 |
|
SCV |
Mid/ Rear |
4 (Floating)/ 6 (Detent) |
3-Point Hitch |
Hitch Category |
CAT II |
Hitch Lift Capacity on Ball Ends (kg) |
1733 |
|
Hitch Lift Capacity Measured |
1146 |
|
Control Type |
Draft/ Position |
|
Steering |
Category |
Power Assisted Hydrostatic |
Turning Degree |
40° |
|
Adjustment |
Tilt |
|
Electrics |
Generator |
12V / 70Ah |
Tires |
Front/ Rear |
F :11.2-24 / R :16.9-30 |
Dimensions |
Overall Length (mm) |
4117 (With Front Weigth) |
Overall Width (mm) |
1893 |
|
Overall Height (mm) |
2738 |
|
Wheelbase |
2200 |
|
Ground Clearance (mm) |
488 |
|
Weight (kg) |
2450 |
|
Options |
Front Weight (20kg x 6), Base Weight (70kg) |
* The specifications above are subject to change without pre-notice.